LHT00SU1 8-Kanal Logic Analyzer Virtuelle Oszilloskop I2C SPI KÖNNEN Uart USB Verbindung 16Mhz Mit Prüfung Clamp Linie USB Draht
LHT00SU1 8-Channel Logic Analyzer Virtual Oscilloscope I2C SPI CAN Uart USB Connection 16Mhz With Testing Clamp Line USB Wire Function: Data Logger I2C controller PWM controller Frequency meter Remote controller Frequency generator Pulse / edge counter Dual channel voltmeter 8-channel logic analyzer Mixed signal oscilloscopes and logic analyzer Dual input oscilloscope (single, 16Msps, 3MHz bandwidth) 8 digital channel + 1 analog channel logic analyzer, support for multiple protocols Analog Specification: Sensitivity: 78mV Sampling channel: 1 channel Input voltage range: -10V to + 10V Maximum analog bandwidth: 3MHz Number of input channels: 2 channel Maximum vertical resolution: 256 level The maximum sampling frequency: 16MHz Digital Specification: Number of channels: 8 Input voltage: 0V-5.3V Input Low level: 1.4V Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2 The communication interface parameters: USB parameters: USB2.0 high-speed 480Mbps System requirements: Need 2G or more hard disk Memory Requirements 128M or more You need to install Framework 3.5 SP1 Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1 Supported operating systems Win2000 / XP / Vista / WIN7 (32bit) Celeron 4 2.0G or Pentium 4 1.8G higher processor Package list: 1 x USB connection line 1 x Testing clamp line (with 10 test clip) 1 x LHT00SU1 Oscilloscope Logic Analyzer Note: If your system is WINDOWS XP, please check whether your computer has ".NET 3.5 SP1" this component, if not, go to the Microsoft website to download and install. LHT00SU1 8-Kanal Logic Analyzer Virtuelle Oszilloskop I2C SPI KÖNNEN Uart USB Verbindung 16Mhz Mit Prüfung Clamp Lini